Patient Monitoring through GSM modem

Description:
The primary function of this system is to monitor the temperature and Heart Beat of the Patient and the Data collected by the sensors are sent to the Microcontroller. The Microcontroller transmits the data over the air. Here we are using the GSM modem in order to transmit the information. From the transmitter the recordings are sent as an SMS to the care taker or the expert which have been given as the recipient. Not only we send the information through GSM module as SMS we also display the readings on LCD. And when the conditions go abnormal then we sense those values and then alarm the people around by blowing the alarm and also sending by sending as urgency SMS.

You will get a CD with this project:
CD contains following things:

1) Project Report
2) Circuit diagram
3) PCB layout
4) Microcontroller program in assembley language
5) Hex file of the microcontroller code
6) Datasheets of all the components / ICs used in the project

Description in detail:
The functioning of Heart Beat device is based on the truth that the blood circulates for every heartbeat that can be sensed by using a circuit formed by the combination of a LDR and LED. Depending upon the rate of circulation of blood the heart beat rate per minute is calculated. This calculated value is communicated to remote person through a GSM modem interfaced to it.

It mainly consist of following blocks
1) Microcontroller based control unit with regulated power supply
2) Heart Beat Sensor
3) Temperature sensor
4) GSM Modem (sim300 unit)
5) LCD Display
6) Buzzer that beeps for critical conditions

Tags:  Heartbeat monitoring, Pulserate monitoring, Biomedical monitoring, Hospital projects

Project Photographs:

Project Cost :

10000/-

Buy this project: