Industrial Automation Using Cellphone

Description:
Now days, marketing demands are increasing continuously. If you can't satisfy demand then you will knock out of the race. There is no time limit for work. So in modern industry, it needs to give alignment without going on field. Consider one case, that you are field engineer, company will start at 9 o'clock. But you have to turn on boiler at 7 o'clock to start working at 9 o'clock. In this case you have to go at 7 o'clock but by using this project you can start boiler by just giving command from your mobile. Boiler is just example you can turn on or turn off any controlling device.

You will get a CD with this project:
CD contains following things:

1) Project Report
2) Circuit diagram
3) PCB layout
4) Microcontroller program in assembley language
5) Hex file of the microcontroller code
6) Datasheets of all the components / ICs used in the project

Block Diagram:

Description: For giving command, you have to just call on the mobile on set which you have set on field. This mobile is on auto answering mode. This will receive your call. Then particular key is assigned to every controlling action. E.g. - key 1- turn on motor, key 2- turn off motor. Key 3- turn on machine etc. Such that by giving commands from mobile you can control industrial work. It is advantages for all type of industrial work.

Advantages:
1. No need to go on field.
2. Higher relibilty.
3. Cost effective.
4. Fast efficient.
5. Six devices can be controlled by single key command

Applications:
1. Industrial automation.
2. Can also be used for security purpose after modification.
3. In places where control of action has not any time limit.

Project Photographs:

 

Project Cost :

5000/-

Buy this project:

Video of the project: Industrial Automation Using Cellphone

=============================================================================

Question and answers about this project:

Question: How much time will it take to reach project by courier?
Answer: Project PCB is ready, so it will take 2 days to complete the proejct. And then 2 to 3 days to courier the project.

Question: I am studying in Australia. I just have queries if this project would work for the mobile network in Australia, if so, how?
Answer: Yes, this project will work in Australia. Concept behind this project is controlling by DTMF tone.This will work on any mobile which can generate DTMF tone.

Question: What about cell phone? Do you provide mobile with the project? Does mobile handset included in project kit?
Answer: No, we don't provide mobile or handset with the project.

Question: We are students of instrumentation engineering branch. Is this project instrumentation based project?
Answer: Yes, you can submit this project as a instrumentation project.

Question: Why you have used the relay for isolation? Can you use the opto coupler for the isolation purpose?
Answer: No, we can't use the opto coupler. Since we have to interface the AC devices.

=============================================================================