RFid Based Highway Toll Tax Collection System

RFid Based Highway Toll Tax Collection System

Project Cost: 7,200

Project Code: 1515

Download the Synopsis of the project

Description of the project:

The RFID Based Highway Toll Tax Collection System allows vehicle drivers to pass the toll tax booths without stopping at the toll booths. The toll amount is deducted from the RFID card. This RFID card is rechargeable and the account is stored on the records.

The automatic toll collection system will have two benefits.

  • The first benefit is that the movement of traffic will be much faster as the user will not wait to give the money because the driver has to just show the RFID card in front of the card reader. And then the RFID based automatic gate control system will open the gate to pass through.
  • The second benefit is that the driver doesn’t have to carry the money each time. He/she will just recharge the RFID card by a certain amount and will use this card each time he travels. This is a little bit similar to using credit cards.

Video of the project RFid Based Highway Toll Tax Collection System:

Block Diagram of the project:

RFid Based Highway Toll Tax Collection System

You will get the following documents with this project:

  1. Project Report in pdf format and in word format ( .doc or .docx )
  2. Circuit diagram
  3. PCB layout
  4. Microcontroller Program in assembly language
  5. Hex file of the Microcontroller code
  6. Datasheets of all the components / ICs used in the project
  7. Power point presentation / PPT file

Photographs of the RFid Based Highway Toll Tax Collection System:

RFid Toll Collection
RFid Highway Toll Tax Collection
RFid Based Highway Toll Tax Collection System

A detailed Description of RFid Based Highway Toll Tax Collection System:

Description in detail: It mainly consist of following blocks

  1. Receiver: We are going to use an Infrared receiver. It is used to detect that vehicle has passed away from the electronic toll collection plaza.
  2. Transmitter: Infra-Red transmitters used are IR LEDs. IR rays from transmitters are reflected from the vehicle and are received by the receiver.
  3. Microcontroller: This is the CPU (central processing unit) of our project. We are going to use a Microcontroller of 8051 family. The various functions of Microcontroller are like: I. Reading the RFID card number from the RFID reader. II. Sending this data to LCD so that the person operating this project should read various informative messages. III. Sensing the command given using keypad and receiving signal from the IR receiver. IV. Sending the data to the motor or buzzer depending upon the RFID card number and balance inside the card.
  4. LCD: We are going to use 16×2 alphanumeric Liquid Crystal Display (LCD) which means it can display alphabets along with numbers on 2 lines each containing 16 characters.
  5. DC motor and Motor Driver: We are going to use a DC motor to open the gate. A motor driver IC is required to drive the motor.
  6. RFID card reader: This is one of the most important part of the project. It reads the unique number from the RFID cards and sends it to the Microcontroller.

Applications, Advantages, and Future Development for the project:

  1. RFID automated gate project can be used in the Toll collection plazas on Highway.
  2. RFID based automatic gates can be used in octroi collection booths for faster access.
  3. The electronic toll collection system project can be further developed and we can send this data to a remote location using mobile or internet
  4. A voice alarm system can also be added to indicate that card has insufficient balance & persons can’t pass through RFID based automatic toll gate system.

Questions and answers about this project:

Question: I am from Coimbatore and need a little more advanced version of it which includes a vehicle identification system, vehicle weight detection, and much more. Can you provide this?

Answer: Sorry, at present we can’t provide these modifications.

Question: If there is no amount on the card will the person be able to pass through the toll? And the second question is, in this project will the card you give already be recharged earlier? Or will you give a card when shown to the RFID reader, just open the toll?

Answer: If there is no balance in the RFID card then respective message will be displayed on LCD display and buzzer will be turned on. And the person or the car will not be allowed to pass through toll. When you turn on the project, at that time each card will have an initial balance of Rs.50. Also, we have provided a keypad to recharge the RFID card. You can press recharge key to go into recharge mode..

30 thoughts on “RFid Based Highway Toll Tax Collection System

  • Nikhil

    How much amount will be in the RFID card? How do you recharge it after the amount is over in the card? Will you first itself recharge the card?

  • Nikhil

    If there is no amount in the card ,the person wont be able to pass through the toll right?

  • DEEPIKA

    how to recharge the rfid card?

  • aarti agrawal

    Hii
    I want to buy this project…but before that i want to clear some queries..
    Can we interface this project with pc n how?
    Can we generate analysis report of how many cars passed throug toll?
    What language u r using for this implementation in pc java or .net?
    What language is used to code microcontroller?

  • aarti agrawal

    Hi
    If i buy this project and before my exam if any of the component from circiut damages then it would make condition severe for me..so will u provide some xtra components along with circiut like n all??

  • Mani kumar

    May i know the frequency range and distance to detect rfid card from rfid reader?

  • Intakhab

    The Amount recharged is stored in the microcontroller , so when there is power interruption the amount stored will get erased .
    CAN AN EEPROM BE USED TO STORE THE AMOUNT
    if yes pls let me know , i need this project urgently

  • Vikram

    Hi…I like this project & I would like to know some information regarding shipping & equipment you provide . . .

  • neetu

    plz tell something extra which I can add to this . this is must
    plz tell me as soon as possible

  • sanket shah

    sir I want to.know that is rfid.good.for an diploma basis or only for be??

    • Microtronics Technologies

      Hi Sanket Shah, RFID based projects are good for Diploma and also they are good for BE students.

  • manikanta

    As u said, if there is no balance in the rfid card then the vechcle does not pass through the gate. So if da vehicle does not pass through the tollgate then what about the remaining vehicles that are back of the present car. there will be no way for the other vehicles to pass through the gate till the present car passes the gate right..?? Is there any solution to overcome this problem……
    Please reply…..

  • manju

    is it possible to in arm 7 based instead of 8051

  • arman

    is it a complete hardware project or a part of the software included..if included what on what domain or platform the software is developed..pls rply asap..thank u..

  • prince

    is this possible get the hardware offline or directly from your place

  • Santosh.S

    Sir i would like to order this project, so if u give d how to order..and more information giving to d CD means vedios pls tell me..

  • suraj

    which micro controllers can be used for automatic toll tax system using rfid

  • pallavi

    Sir , I am Pallavi I have question is wat is the platform used, project contributions also extra curricula tell me fast on my mail sir.

  • preethi

    can we know how to measure the weight of the vehicle?

  • Pratik

    Hi! if there is no amount in the card and the car is at the toll plaza, how will it exit it? This then causes more taffic and beats the purpose of time and fuel saving. Is there any solution you can suggest?

  • Asishsiddhardha

    Can we make this project using pic microcontroller 16f877a and if yes then could u help it out

    • Microtronics Technologies

      Yes, we can make this project using PIC microcontroller

  • I want to know that ,does the same circuit can be implemented in real toll gate system? I want RFID based toll gate opening system for real project . How much it costs?

  • I want this system for implementing in reality . Send us a quotation .

  • hrishi chobe

    can we do this project using a arduino board and wich board we can use ?

  • Vishnu

    Sir I have a question .In our country we have the reduction in amount while we are returning to the same place within 24 hours. How to implement this system in the project

  • rizwan

    Sir how this project will differentiate between high vehicle and small vehicle.i means that how it knows that this is truck or car because the toll taxes are low and more for small and big vehicle.. plz give me feedback about that..

  • Tufail ur rehman

    sir where we have to put the RFID tag on the vehicle?
    and if in case of accident the RFID tag is damaged can we replace it with new one???
    can we locate the position of vehicle in case of theft?
    waiting for replyyyyyy plzzz

  • Rajendra Dandale

    Dear Service Provider,
    I want RFID for count the perfect time , cut off time of running, can such system is available.

Leave a Reply to Mani kumar Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

×

Hello!

Click one of our representatives below to chat on WhatsApp or send us an email to info@mtronixtech.com

×How can I help you?