Home  Projects of 8051  Project Details
Person counter and Password detector

Description: Main concept behind this project is to measure and display the number of persons entering in any room like seminar hall, conference room. LCD display placed outside the room displays this value. And when number of persons inside the room are zero, power supply inside the room can be cut using a relay interface. Second part of project serves the functionality of a door-latch opening using a password entered through keypad. As well as sending this data to a computer through serial port. This module also turn on buzzer if 3 wrong passowords are entered consequently. User can change this password anytime he/she wish using a keypad.


Block Diagram:

Person Counter and Password Detector

Description in detail: It mainly consist of following blocks
1. Transmitter: We are going to implement the Person counter module using a 2 transmitters and 2 receivers. We are going to use Infra-Red transmitters because infrared beams are not visible to human eyes. Transmitter used are IR LEDs
2. Receiver: We are going to use a Infrared receiver. It is a active low device which means it gives low output when it receives the Infrared rays.
3. Microcontroller: This is the CPU (central processing unit) of our project. We are going to use a microcontroller of 8051 family. The various functions of microcontroller are like
I. Reading the digital input from two infrared receivers and calculate the number of persons from them. II. Sending this data to LCD so that the person operating this project should read the number of persons inside the room. III. Sensing the password using keypad and to check whether it is a correct password or a wrong password and rotate the stepper motor if the password entered is a correct password. IV. Sending the data to the computer using serial port. This data consist of number of persons inside the room and the status of entered password (Correct/wrong)
4. LCD: We are going to use 16x2 alphanumeric Liquid Crystal Display (LCD) which means it can display alphabets along with numbers on 2 lines each containing 16 characters.
5. PC Interfacing: We are going to use max 232 IC for pc interfacing, the values of number of persons inside the room and the status of entered password (Correct/wrong) will be sent to pc.
6. Keypad: User will enter the password using the keypad. Various keys of keypad are as following,
I. 0 to 9 II. Enter III. Escape



Buy this project:

<< Prev Project                           View complete list of Projects                           Next Project >>

Highlights

  • Ordering information

    Send us a mail at: For project enquries, send us mail at:

    rushi.8051 [at] gmail [dot] com
    Please write us a mail for the project enquiries, pricing and availibility.

    I have not linked my email id, so as to avoid spammers so please copy the email address and paste it in your email composer